If your job site is more that 150 miles from Oxford
There is also an extra charge to cover accomadation and extra travelling of £650
If this is your scenario please also purchase this extra charge.
Now available as an installation service: -
Sundeck Rubber Chip Flooring offers a high quality, attractive and functional pool surround
This is suitable for a multitude of situations.
Available as a full installation service onto a prepared pool surround, via dedicated contractors, arrange a pre site visit of deemed required, offer a full quote per metre or per job and schedule the full installation.
Sundeck is a mixture of coloured rubber granules and two part epoxy resins – the granules being ground from virgin sheet rubber and the epoxy resin having a base of inert pigments hardened by a polyamine adduct in Benzyl Alcohol – therefore hard curing and water resistant.
Sundeck is laid 6mm thick onto almost any clean dry substrate, such as screed, concrete (if trowel finished) or timber The substrate should include provision for any drainage required as water will flow through the Sundeck and seek a natural course.
Available in a choice of colours – motifs and colour-ways can be incorporated as required.
Please contact Crystal Enterprises Ltd for further details.
Benefits:
- Safe and Non-Slip – the virgin EDPM rubber is developed especially to provide a comfortable, slip resistant surface, even when wet.
- Free Draining – Sundeck will allow water to penetrate through to the subsurface and be drained away.
- Strong and Hardwearing – an all weather surface which will accommodate continuous wear and is not effected by frost. Being flexible, it is excellent at covering uneven or cracked surfaces.
- Cool and Comfortable – soft and comfortable to walk on, Sundeck also stays cool in hot weather.
- Versatile – in addition to pool surrounds, Sundeck is also suitable for changing rooms, patio areas, corridors and leisure areas.
- Low Maintenance – easy to maintain and clean, and any damaged areas can be replaced with new materials.
Once laid, Sundeck must be allowed to cure fully before use. On indoor surfaces it is essential that humidity and condensation are kept to an absolute minimum. Foot traffic is acceptable after 48 hours, but full curing can take 7 to 14 days depending on conditions.
